How to Assemble the Muv-Luv Takemikaduchi Type-00F Kit

Quick answer

Build the Takemikaduchi Type-00F by working in subassemblies—head, torso, arms, legs, and weapons—then test-fitting each joint before final assembly. Keep the 1/144 scale in mind: parts are small, so clean nubs and dry-fit twice before applying glue or paint.

Step-by-step assembly

1. Prepare the workspace and inspect runners: Clear a well-lit area, lay out the runners, and compare part numbers against the manual before cutting anything. Common mistake: clipping parts before checking orientation, which can lead to mirrored or misaligned pieces later. Keep the manual open to the parts map and sort runners by label.
2. Clean nubs on each part before assembly: Use side cutters, then a hobby knife or sanding stick to remove gates flush. Checkpoint: run a fingernail across the surface—any ridge will show under paint or light. Clean parts as you go, not after the whole kit is built.
3. Build the head subassembly first: Assemble the head according to the manual, test-fitting the face and helmet parts without glue. Common mistake: forcing a tight fit and cracking small detail parts; if resistance is high, lightly sand the peg. Set the head aside in a small tray so tiny parts do not get lost.
4. Assemble the torso and waist: Dry-fit the chest, abdomen, and waist joints to confirm range of motion before closing seams. Checkpoint: the torso should hold together without glue if the kit is snap-fit; if not, apply cement sparingly on mating surfaces only. Test the waist rotation before moving on—it is harder to adjust later.
5. Build the arms and shoulders: Attach shoulder armor and arm joints, checking that left and right parts are not swapped. Common mistake: gluing shoulder joints before testing the arm swing; keep them movable until you are satisfied with the pose. Mirror-check each arm against the other before finalizing.
6. Assemble the legs and feet: Build each leg as a unit, then test-fit the hip connection. Checkpoint: the model should stand without support; if it leans, adjust ankle or hip alignment before proceeding. Balance the figure on its feet before adding weapons or backpack.
7. Attach weapons and final details: Mount the weapon loadout and any optional parts last, following the manual’s placement. Common mistake: attaching weapons before the main body is stable, which can cause the model to topple and small parts to snap. Do a final pose check with weapons attached, then display on a stable surface.

Kit at a glance

• MUV-LUV ALTERNATIVE TOTAL ECLIPSE 1/144 TAKEMIKADUCHI TYPE-00F TAKAMURA YUI KI: 1/144 scale Takemikaduchi Type-00F Takamura Yui KI, the first in Kotobukiya’s Muv-Luv Alternative model kit series at this scale. The compact scale means smaller parts and tighter tolerances, so clean nubs carefully and dry-fit each joint before final assembly.