How to Build Megami Device M.S.G 01 Tops Set Black

By Home - Kotous Store | Published: 2026-10-25

Category: How-to Guides

Step-by-step guide to assembling the M.S.G 01 Tops Set Black for your Megami Device model kit, with tips to avoid common mistakes.

Quick answer

Assemble the M.S.G 01 Tops Set Black by following the included instructions, but pay extra attention to part alignment and seam removal for a clean finish on your Megami Device figure.

Why the M.S.G 01 Tops Set Black is a Great Addition

The M.S.G 01 Tops Set Black is a plastic model kit designed to add a stylish black top to your Megami Device figures. It pairs well with various body types and offers a sleek look that complements the heavy-duty weapons and armor typical of the series. The set includes multiple parts for different poses, but the small pieces require careful handling.

Tools You Will Need

For a smooth assembly, have a pair of sprue cutters, a hobby knife, and a small file or sandpaper. Optional but helpful: plastic cement for permanent joints and tweezers for tiny parts. The kit does not include tools, so prepare them beforehand.

Assembly Steps for M.S.G 01 Tops Set Black

Step 1: Prepare the Parts: Remove the parts from the sprue using sprue cutters. Cut close to the part, then trim any remaining nubs with a hobby knife. Common mistake: cutting too deep can damage the part surface. Sand the cut areas lightly for a smooth finish.
Step 2: Dry-Fit Before Gluing: Assemble the top pieces without glue first to check alignment. This helps identify any tight or loose connections. Common mistake: gluing before dry-fitting can lead to misaligned seams. If parts feel too tight, gently sand the contact points.
Step 3: Apply Cement to Joints: Use plastic cement on the seams you want permanent. Apply a thin layer to both surfaces, press together, and hold for 10-15 seconds. Common mistake: using too much cement can cause plastic to warp or leak. Wipe away excess cement immediately with a damp cloth.
Step 4: Attach to Your Megami Device Figure: Once the top is fully cured, carefully snap it onto the figure's torso. Align the pegs with the holes and press gently. Common mistake: forcing the part can break pegs or stress the figure's joints. If the fit is too tight, slightly sand the pegs for easier attachment.
Step 5: Pose and Display: After assembly, pose your figure as desired. The M.S.G 01 Tops Set Black allows for a range of arm and shoulder movements. Common mistake: posing too aggressively right after assembly can cause parts to pop off. Let the cement cure fully for 24 hours before heavy posing.

Product Facts

MEGAMI DEVICE M.S.G 01 TOPS SET BLACK: "Megami Device" is a plastic model kit series combining Bishoujo-style beauties and heavy-duty weapons and armor. This means the M.S.G 01 Tops Set Black is designed to fit seamlessly with Megami Device figures, maintaining the aesthetic and articulation standards of the line.
MEGAMI DEVICE M.S.G 01 TOPS SET BLACK