Fixing Loose Joints on Your Muv-Luv Takemikaduchi Model

Quick answer

Loose joints on your Muv-Luv Takemikaduchi model can usually be fixed by applying a thin layer of clear nail polish or plastic cement to the peg, letting it dry, then reassembling.

Diagnosis and fix steps

• Symptom: A joint (shoulder, elbow, hip, or knee) cannot hold a pose and flops under its own weight or with light touch.
• Likely cause: The peg is slightly undersized for the socket, or the socket has worn from repeated movement. This is typical for polycap or friction-fit joints.
• Corrective action: Disassemble the loose joint. Apply a thin coat of clear nail polish or plastic cement to the peg. Let it dry fully (24 hours for nail polish, 10 minutes for cement). Reassemble and test. Repeat if still loose. Do not use superglue; it can fuse parts permanently. If the joint is still loose after two coats, consider a small piece of tissue or tape as a shim.
• When to stop or choose another option: If the joint is cracked or the peg is broken, do not attempt repair with these methods. Seek replacement parts or use a pin vise and wire for a permanent fix. For cracked plastic, stop and source a replacement runner or contact Kotobukiya support.

Product facts

• MUV-LUV ALTERNATIVE (Anime) TAKEMIKADUCHI TYPE-00R THE IRG'S 16TH BATTALION COMMANDER: The Muv-Luv Takemikaduchi Type-00R is a NON-scale model kit from Kotobukiya, part of the Ver.1.5 update. Its articulated joints may benefit from minor tightening to maintain pose stability over time.